Christie Mirage S+14K User Manual page 150

OPTIONAL INPUT MODULES
RGB400BA Input Module
38-804610-xx
RGB400 Active Loop-Thru
Input Module
38-804607-xx
F-2
Roadster / Mirage S+ User's Manual
Downloaded From projector-manual.com Christie Manuals
RGB500 Features
◊
accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or
separate horizontal and vertical sync), up to 500 MHz bandwidth
◊
accepts YPbPr, composite (on green) and Y/C (on red/blue)
◊
BNC connectors for RGB signal inputs
'
Connect three-, four-, or five-wire RGB video signals of up to 400 MHz bandwidth—
these are signals typically produced by high-resolution computer or workstations. The
buffering capability of the module enables the incoming signal to be sent to a remote
destination. Inputs are 75
RGB400BA Features
◊
accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or
separate horizontal and vertical sync)
◊
accepts YPbPr, composite (on green) and Y/C (on red/blue)
◊
BNC connectors for RGB signal inputs
◊
Buffered signals to a remote destination
'
The RGB400 ALT Input Module receives analog RGB input signals from computers
or other RGB source devices. Video inputs are 75
provide buffered loop-through to another display device.
RGB400 ALT Features
◊
accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or
separate horizontal and vertical sync)
◊
accepts YPbPr, composite (on green) and Y/C (on red/blue)
◊
BNC connectors for RGB signal inputs
◊
buffered loop-through video outputs
S
terminated.
S
terminated. Video outputs