Christie Mirage S+14K User Manual page 81

OPERATION
Use the first of six
options in the PIP
and Switching
menu to enable and
define how you
want to use PIP.
Swap Main and PIP Image
Toggle the current picture-in-picture relationship so that the primary (main) image
becomes secondary (PIP), and the secondary image becomes primary. Swapping is
available only when PIP is enabled.
NOTE: There may be a slight delay when swapping the Primary and Secondary
images.
PIP Enable
(Short cut: Press on
the Remote) if menu not
present.
Toggle to display from two
sources at once (Picture-in-
Picture) or the primary
source only. This checkbox
turns the secondary source
on and off.
NOTE: Disable PIP and Best Switching for Interlaced sources > 35kHz.
PIP Size and Position –
SUBMENU
Most controls in the PIP Size and
Position menu adjust the PIP
(secondary) image in the same
fashion as their counterparts in
the main Size and Position menu
adjust the main image—see 3.6,
Adjusting the Image for details.
Exceptions are:
–Set the
POSITION PRESETS
location of the PIP (secondary)
image in the display.
– Choose the desired aspect ratio for your PIP window. A
ASPECT RATIO PRESETS
"Default" aspect ratio matches that of the projector, whereas "Anamorphic" will be a
widescreen window. Choose according to your incoming source material.
3-47
Roadster / Mirage S+ User's Manual
Downloaded From projector-manual.com Christie Manuals