Christie Mirage S+14K User Manual page 4

INTRODUCTION
How The Projectors Work
1.2 Components
Model Name
+
Roadster S 12K
+
Roadster S 16K
+
Mirage S 14K
1-2
Roadster / Mirage S+ User's Manual
Downloaded From projector-manual.com Christie Manuals
Inputs
One analog RGBHV/YPbPr input with 5 BNCs
One DVI-I input for either digital RGB/YCrCb or analog RGB/YPbPr signals
One analog composite-video input
One analog S-video input
Built-in multi-standard video decoder (NTSC, NTSC 4.43, PAL, PAL-M, PAL-
N, PAL-60 AND SECAM)
One Dual SD/HD-SDI input (Roadster S+ series only)
Compatible with all currently used HDTV formats
Special Display Functions
Auto setup with seamless cut-and-fade source switching
Electronic brightness uniformity
Screen-to-screen matching and blending for smooth multiple-projector displays
Communications and Diagnostics
2 standard keypads: built-in and remote (for IR or wired control)
Front and rear IR sensors
Ethernet, RS232, RS422, and GPIO control ports
Easy-view LED for error codes and LCD for status and error messages
Voltmeter for monitoring AC
Roadster S+ series and Mirage S+ series accept data/graphics and video input
signals for projection on to front or rear flat screens. High brightness light is
generated by an internal Bubble lamp, then modulated by three DMD (digital
micromirror device) panels that provide digitized red, green or blue color
information. Light from the "on" pixels of each panel is reflected, converged and
then projected to the screen through the front lens, where all pixels are superimposed
as a sharp full-color image.
Make sure you have received the following standard components:
Projector
Infrared (IR) remote keypad and conversion cable
Power cord
Using 3D in Mirage Manual
Roadster S+ / Mirage S+ User's Manual
3D Stereo Sync Cable (Mirage S+ only)
Differences Between Models
Lamp Dual SD/HD-
Type SDI Module
2.0 kW
2.4 kW
2.4 kW Optional
The 2 Roadster S+ models differ in light output while the Mirage S+ series has 3D
capability but optional stacking hardware. Refer to this manual for all three models.
3D Stacking
Mounts
Not available
Not Available
Optional
4 Top Integral Rigging
Eyebolts Hardware
Optional