Christie Mirage S+14K User Manual page 71

System Configuration
— COMMUNICATIONS —
Downloaded From projector-manual.com Christie Manuals
DISPLAY CHANNEL LIST —
list whenever you press
icon in the Channel Setup menu will appear here. The "Display Channel List"
option also enables on-screen feedback when using the
the channel list and input dialog box while switching channels and sources during a
presentation clear the checkbox.
NOTE: The Channel List and input dialog box cannot be hidden during use of the
menus.
DISPLAY SLIDEBARS —
current image whenever an adjustable parameter is selected directly with a key such
as Contrast or Bright . If "Display Slidebars" is unchecked, these slidebars can still be
accessed, but will be hidden during adjustment. This option does not affect slidebars
in menus.
DISPLAY ERROR MESSAGES —
detected in either the incoming signal or projector. Select "Screen" or "All" (default)
to see brief on-screen messages. This is particularly recommended during setup or
testing of the projector. Or select "RS232" to receive messages via RS232 (or
RS422) serial communication only. To hide error message displays, such as during
shows and presentations, select "Off" or "RS232".
SPLASH SCREEN SETUP —
display a special introductory splash screen image, such as your company logo,
graphic or message.
•
Always Off = A splash screen never appears
•
Always On = A splash screen is always on behind the current display
image, similar to wallpaper.
•
Startup Only – The splash screen logo appears at projector startup only.
•
Startup And No Signal – A splash screen appears at startup only if there is
no source signal.
To replace the default "Christie logo" splash screen (or other) with one of your own,
use KoRE Librarian to download the desired .bmp to the projector. This will
overwrite the current splash screen content in projector memory.
'
Settings in the Communications
submenu define and control how
single or multiple projectors are
linked with each other and with a
controlling device.
Baud Rates
The baud rate setting determines the
speed of communication to and from
the projector on the RS232 or RS422
links. The maximum rate for the
RS232 is 115200; for RS422 it is
19200. Set the baud rate to match
that of your controlling device, such as your PC. If you are unsure about what baud
rate to choose, refer to the documentation for the controlling device. In an existing
Enter a checkmark if you want to see a scrollable channel
Chan from your presentation. Channels marked with a list
Enter a checkmark to superimpose a small slidebar over the
Choose how you want to be notified of errors
Use the Splash Screen to choose when you would like to
Roadster / Mirage S+ User's Manual
OPERATION
Input key. If you prefer to hide
Figure 3.17
3-37