Christie Mirage S+14K User Manual page 51

What Channels
Are Defined So Far?
Downloaded From projector-manual.com Christie Manuals
'
All available channels are listed in the Channel Setup menu, which describes how
each channel can be accessed and which serves as the gateway for editing, copying
and deleting channels.
From the presentation
level press Menu to
display the Main menu.
To display the Channel
Setup menu, press
move the highlight to the
Channel Setup option and
press Enter . The Channel
Setup menu will appear
(see sample at right),
with the active channel highlighted.
WHAT APPEARS IN CHANNEL SETUP MENU?
far and indicates where they connect on the projector's rear input panel. The far left
column lists channel numbers currently defined. The
values in the far right columns indicate horizontal and
vertical frequencies—if a user has defined a name for this
channel, it appears here instead. Remaining columns
contain details pertaining to each channel setup, such as its
switcher number (always 0 = projector), slot location (01-
08), a variety of icons indicating access to each channel, and an abbreviated
description of each signal type. See Editing a Channel Setup for details.
NOTE: If you have more than a handful of channels, use
remaining channels not visible in the initial display of channels.
Either channel list, whether the
SIGNAL TYPE —
menu, identifies signal types in a shortened form as defined below. These descriptors
indicate what signal information the projector uses to identify a match for a given
channel, and are preceded by either an "i" (interlaced signals) or "p" (progressive
signal"). See Table 3.2.
Table 3.2. Abbreviations for Signal Type
Abbrev.
4WH
4WV
SG
5W
5WR
SVid
CVid
Dig
FUNCTIONS WITHIN THE CHANNEL SETUP MENU —
highlight the desired channel in the Channel Setup menu and do one of two things:
•
Press Func
channels. See Copying or Deleting a Channel below.
, or
Figure 3.9. All Channels Appear in the
Channel Setup Menu
This menu lists all channels defined so
Signal Type
Composite (4 wire) on HC input
Composite (4 wire) on V input
Sync-on-green
Separate H,V
Separate H,V swapped
S-Vid
Composite Video
Digital
if you want to copy the selected channel or delete this or other
Roadster / Mirage S+ User's Manual
OPERATION
and to see the
Chan key list or the Channel Setup
To copy, delete or edit a channel,
3-17