INSTALLATION & SETUP
(COMPONENT VIDEO)
2-18
Roadster / Mirage S+ User's Manual
Downloaded From projector-manual.com Christie Manuals
NOTES: 1) If for some reason the projector fails to recognize a signal as an RGB signal,
specify this Color Space option within the Image Settings menu. See 3.6, Adjusting the
Image. 2) To connect YPbPr signals–such as from DVDs or analog HDTV sources–to
INPUT 1
, use the red, green and blue BNCs as described in YPbPr Signals (below)
'
Connect a YPbPr signal (a.k.a. component video) to
YPbPr
Figure 2.26.
NOTES: 1) If, for some reason, the projector fails to recognize a YPbPr signal,
specify this Color Space option within the Image Settings menu. See 3.6, Adjusting
the Image. 2) Do not connect digital component signals (known as YCbCr) to
1 or 2
. Use the appropriate digital interface option installed at
Figure 2.26. Connecting YPbPr
Figure 2.25. Connecting RGB Input
INPUT 1
INPUT 2
or
as shown in.
INPUT 5 or 6
.
INPUT