Christie Mirage S+14K User Manual page 88

OPERATION
3-54
Roadster / Mirage S+ User's Manual
Downloaded From projector-manual.com Christie Manuals
1. Set up and optimize all projector settings. You can ignore color temperature, since
you will be redefining color performance in this procedure, but do optimize each
projector in every other aspect. Closely align all screen edges.
2. Assign projector numbers to make communications easier. Use desired keypad.
3. Use the same lamp mode for all projectors, and do the following:
Set Select Color Adjustment to "Max Drives"
Display a full white test pattern
Adjust lamp power and Optical Aperture until adjacent white fields appear
the same brightness.
4. Display the Color Adjustments by X,Y menus for all projectors. Each menu shows
the x/y coordinates defining the "Max Drives" color gamut for this projector. Jot
down the values shown in one (any) of the displays. See Figure 3.27. Or use the
"Copy From" function to copy them into a "User" gamut in one projector.
Figure 3.27. Jot Down a Set of "Max Drives" X/Y Values
5. In each projector, select a "User" color adjustment (1-4) to enable Color
Adjustments by X,Y changes. Then enter your recorded x/y values into each menu
(Figure 3.28).