Configuring The Rs232 Port; Setting Up The Ethernet; Understanding Message Format - Christie Mirage SST Technical Reference

Configuring the RS232 port

Configure the RS232 port to send Christie serial commands using a standard RS232 serial cable.
1. Select Menu > Communications > Projector Communication.
2. Use the down arrow to select Baud Rate.
3. Select the appropriate baud rate and select Enter.
4. Use the down arrow to select Network Routing.
5. Select the type network routing appropriate for your projector and select Enter.

Setting up the Ethernet

Ethernet is setup to obtain an IP address automatically if a DHCP server is on the network, modify IP
settings, or manually enter an address.
You cannot change the IP settings using the web interface. Only connect external networks to the
external Ethernet port on the IMXB, not the laser rack RJ45.
1. From the display panel, use the arrow keys to select IP Settings.
2. To set the type of network, select DHCP or Static.
3. If you selected Static, manually enter the network information for the IP Address, Subnet,
and Gateway.
4. Select Apply and select Enter.
5. Select MENU > Communications > Network Settings.
6. Select Device name.
7. Use the up and down keys to enter the name of the projector.
8. Select Enter.

Understanding message format

Commands sent to and from Mirage SST are formatted as simple text messages consisting of a three
letter command code, an optional four letter subcode, and optional data.
Source Format
From controller (Code Data)
(Code+Subcode
Data)
(Code ?)
(Code+Subcode ?)
From projector (Code Data)
(Code+Subcode
Data)
Mirage SST Technical Reference–Serial Commands
020-103005-03 Rev. 1 (01-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Function
SET (set power on)
SET (set input port configuration)
REQUEST (what is current power
state?)
REQUEST (what is current input port
configuration?)
REPLY (power state is 1 "On")
REPLY (input port configuration is 1
"One-Port")
Communicating with Mirage SST
Example
(PWR1) or (PWR 1)
(SIN+PORT 1)
(PWR?) or (PWR ?)
(SIN+PORT?)
(PWR!001 "On")
(SIN+PORT!001 "One-
Port")
8