Christie Mirage S+14K User Manual page 107

Downloaded From projector-manual.com Christie Manuals
Never attempt to remove a hot lamp. A hot lamp is under great
property damage. Allow to cool completely and handle by the
Make sure to use the correct wattage lamp supplied by Christie.
'
STEP 1
Turn the projector off
Allow the cooling fans to stop automatically before proceeding with Step 2.
'
STEP 2 Unplug the projector
When the cooling fans have stopped, turn main power off, and unplug the projector.
STEP 3 '
Open the lamp door
See Figure 4.2 Loosen the (2)
lockscrews securing the door.
Protective gear required.
STEP 4 '
Remove Lamp Retaining Bar
See Figure 4.3. Remove the 2 screws
that secure the retaining bar along the bottom edge of the lamp module.
WARNING
Lamp replacement is to be done by
a qualified service technician only.
WARNING
pressure and may explode, causing personal injury and/or
housing only.
WARNING
WARNING
Allow the cooling fans to stop
automatically before proceeding.
WARNING
MAINTENANCE
Figure 4.2. Open Lamp Door
Roadster / Mirage S+ User's Manual
4-5