Christie Mirage S+14K User Manual page 44

OPERATION
Focus
,
3-10
Roadster / Mirage S+ User's Manual
Downloaded From projector-manual.com Christie Manuals
To control a specific projector with the keypad, enter the 3-digit number assigned to
the projector you want to use. If you switch to a projector other than the one you are
currently using, the checkmark will disappear.
To broadcast to multiple linked projectors, press
entering a projector number. Keypad commands will then affect all projectors in the
chain.
NOTES: 1) The "Broadcast Keys" option in the Communications menu must be
selected for only one (any) projector in a serial network. The keypad in use must be
OFF (disabled) for the remaining projectors. See also 2.14 Remote Keypad
Protocols and Conversion, and 3.7, Adjusting System Parameters and Advanced
Controls.
Enter
Press
adjustment and return to the previous menu or image.
Exit
Exit
Press
Exit
NOTE:
Exit
editing of a slidebar value) or within pull-down lists. It acts as a "cancel" in these
cases.
Arrow Keys
Use the
within a pull-down list without having to first scroll through options. These keys also
jump to the next page in long menus. See also Editing Text later in Section 3.
Use the
combination with power, shutter and OSD keys to force the corresponding state. See
details provided on the back of the remote keypad.
Zoom Lens H Lens V Lens Focus, Zoom and Lens H, Lens V
, ,
Use Focus ,
the lens for optical sharpness, size, and position. Note the
NOTE: The
keypad is the same as using the
Laser
Press
highlight an area with a light beam (dot). The closer you are to the screen the brighter
the laser beam appears. The laser pointer works best with reduced ambient lighting.
to select a highlighted item, to toggle a checkbox, or to accept a parameter
to return to the previous level, such as the previous menu.
does not save changes within text editing boxes (including number
keys to change a slidebar value or to select a different option
keys to navigate within a menu, pull-down list or text box. Use in
Lens
Zoom , Lens H , Lens V and
Shift
Lens
key, when combined with
Shift
Lens V
to activate the laser pointer, and direct the remote at the screen to
Proj
and then
with their corresponding arrow keys to adjust
Zoom
and Lens H keys on the remote.
Proj
again without
requires a zoom lens.
keys on the built-in