Christie Mirage S+14K User Manual page 39

OPERATION
'
IR Remote
Figure 3.3. Remote Keypad
The IR remote keypad controls the projector by way of wireless communications
from a battery-powered infrared (IR) transmitter. Use the IR remote keypad the same
way you would use a remote keypad supplied with a TV or VCR. When making key
presses, direct the keypad either toward the screen or toward the front or rear IR
sensors on the projector.
NOTE: For improved reception, use an optional remote IR sensor to route the signal
via a phone cable plugged into the wired keypad port.
3-5
Roadster / Mirage S+ User's Manual
Downloaded From projector-manual.com Christie Manuals