Downloaded From projector-manual.com Christie Manuals
'
STEP 2
Install the lens cap and press the lens release button
See Figure 4.9.
'
STEP 3
Rotate the lens
Rotate the lens counter-clockwise
until the tabs are free from the lens
retainer ring.
See Figure 4.10A.
NOTE: The connector slide assembly
allows the connector to move as the
lens is rotated.
'
STEP 4
Pull lens out
Lens connectors will disconnect when
you pull the lens straight out from the
projector. See Figure 4.10B.
WARNING
Unplug the projector.
Figure 4.8. Lens Assembly
Figure 4.9. Depressing Lens Release
Figure 4.10. Rotating the Lens
Roadster / Mirage S+ User's Manual
MAINTENANCE
4-9