Host Table - Planet CS-2001 User Manual

2.7 Host Table

Step 1. Go to System > Configuration > Host Table and set as below:

Configure the Host Name accordingly.

Select IPv4 for IP Version.

Type the virtual IP address that the host name corresponds to in the
Virtual IP Address field.

Click OK.
Note:
1. Host Table requires LAN users to configure their Preferred DNS server in Internet
Protocol (TCP/IP) Properties to be the same as the LAN or DMZ interface address. This is
the same IP address as the LAN user's default.
Figure 2-33 Host Table Settings
65
（ Figure 2-33）