Mechanical Ambient Conditions; Storage Conditions; Operating Conditions; Climatic Ambient Conditions - Siemens SIMATIC HMI TP700 Comfort Operating Instructions Manual

Technical information

7.3 Mechanical ambient conditions

7.3 Mechanical ambient conditions
7.3.1

Storage conditions

The following information is for a device that is transported and stored in its original
packaging.
The device meets the requirements according to IEC 60721-3-2 Class 2M2 with the following
amendments and limitations:
Type of condition
Free fall
Vibration to IEC 60068-2-6
Shock to IEC 60068-2-27
7.3.2

Operating Conditions

The following information applies to a device installed according to the specifications in these
operating instructions.
The device meets the requirements according to IEC 60721 Class 3M3 with the following
amendments and limitations:
Type of condition
Vibration to IEC 60068-2-6
Shock to IEC 60068-2-27
7.4

Climatic ambient conditions

7.4.1

Long-term storage

The following information applies to a device that is stored in its original packaging for longer
than two weeks.
The device meets the requirements of IEC 60721-3-1 Class 1K2.
26
Permitted range
≤ 1 m
5 .. 8.4 Hz, deflection 3.5 mm
8.4 ... 500 Hz, acceleration 1 g
250 m/s , 6 ms, 1000 shocks
2
Permitted range
5 ... 8.4 Hz, deflection 3.5 mm
8.4 ... 200 Hz, acceleration 1 g
150 m/s , 11 ms, 3 shocks
2
TP700 Comfort Outdoor, TP1500 Comfort Outdoor
Compact Operating Instructions, 03/2016, A5E35956909-AB