Table of Contents
Advertisement
S5-115U Manual
2.7.3
Programmers (PG)
Applications:
•
entering programs
•
testing programs
•
monitoring programs.
You can use the following programmers: PG 605U, PG 635, PG 670, PG 675, PG 685, PG 695,
PG 710, PG 730, PG 750 and PG 770.
You can use the programmers in either on-line or off-line mode on.
2.7.4
Operator Panels (OP)
Applications:
•
displaying the current values of internal timers and counters
•
entering new setpoints
•
displaying program-controlled messages
•
displaying input, output, data, and flag areas (OP 396 only)
You can use the following operator panels:
You can use the following monitors:
2.7.5
Printers (PT)
Applications:
•
listing inputs
•
listing outputs
•
listing programs
You can use the following printers:
CP 525 and CP 523 communications processors, programmers (from PG 605U upward) and the SI 2
interface of the CPU 943/944 (ASCII driver required) can be connected.
EWA 4NEB 811 6130-02b
OP 393, OP 395 and OP 396
DG 335 and DS 075
(DS 075 only with CPU 943/944 (ASCII driver))
PT 88, PT 89 and PT 90
Technical Description
2-29
Advertisement
Table of Contents
