Table of Contents
Advertisement
6.5
Changing Data on the Online Device
Always execute changes in the project tree of the selected device and load the changes to the device. Proceed
as follows:
In your project, click the node of the selected device.
²
Execute the desired changes, for example, in the settings.
²
Select the device again and right-click the device.
²
In the menu, select the item Load configuration to device.
²
DIGSI transfers the changed configuration data to the device. After a successful transfer, the device restarts.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-9, Edition 06.2018
Using DIGSI 5
6.5 Changing Data on the Online Device
99
Advertisement
Table of Contents
