Ddm; Figure 4.134 Diagnostics > Ddm; Figure 4.135 Diagnostics > Ddm - Advantech EKI-7706 Series User Manual

4.10.5

DDM

The DDM page allows you to setup the diagnostic alarm status.
To access this page, click Diagnostics > DDM.
The following table describes the items in the previous figure.
Item
Diagnostic Alarm
Apply
The ensuing table for Diagnostic Alarm Information lists the following settings
(informational only):
Diagnostic Alarm
The following table describes the items in the previous figure.
Item
High Alarm
High Warning
Low Alarm
Low Warning
Apply
The ensuing table for Vendor Info lists the following settings (informational only):
Refresh, Port, Connector, Speed, VendorName, VendorOui, VendorPn, Vendor-
Rev, VendorSn and DateCode
Figure 4.134 Diagnostics > DDM
Description
Click the drop-down menu to designate the announcement method:
Disabled, SysLog, E-mail, or SNMP.
Click Apply to save the values and update the screen.
Figure 4.135 Diagnostics > DDM
Description
Click Enabled or Disabled to set the alarm state.
Click Enabled or Disabled to set the alarm state.
Click Enabled or Disabled to set the alarm state.
Click Enabled or Disabled to set the alarm state.
Click Apply to save the values and update the screen.
128 EKI-7706 Series User Manual