Ddm; Figure 4.137 Diagnostics > Ddm > Diagnostic Alarm Settings; Figure 4.138 Diagnostics > Ddm > Dmi Info - Advantech EKI-9226G Series User Manual

Item
Facility
Apply
The ensuing table for Remote Logging Setting Status settings are informational
only: Status, Server Info, Severity, Facility and Delete (click to delete the desired
server address).
4.10.5

DDM

The DDM page allows you to setup the diagnostic alarm status.
To access this page, click Diagnostics > DDM.
Figure 4.137 Diagnostics > DDM > Diagnostic Alarm Settings
The following table describes the items in the previous figure.
Item
Diagnostic Alarm
Apply
The ensuing table for Diagnostic Alarm Information settings are informational only:
Diagnostic Alarm.
The following table describes the items in the previous figure.
Item
High Alarm
High Warning
Low Alarm
Low Warning
Apply
Description
Click the drop-down menu to select facility to which the message
refers.
Click Apply to save the values and update the screen.
Description
Click the drop-down menu to designate the announcement method:
Disabled, SysLog, E-mail, or SNMP.
Click Apply to save the values and update the screen.
Figure 4.138 Diagnostics > DDM > DMI INFO
Description
Click Enabled or Disabled to set the alarm state.
Click Enabled or Disabled to set the alarm state.
Click Enabled or Disabled to set the alarm state.
Click Enabled or Disabled to set the alarm state.
Click Apply to save the values and update the screen.
130 EKI-9226G Series User Manual