Ddm; Figure 4.130 Diagnostics > Ddm - Advantech EKI-7428 Series User Manual

The following table describes the items in the previous figure.
Item
Server Address
Server Port
Severity
Facility
Apply
The ensuing table for Remote Logging Setting Status settings are informational
only: Status, Server Info, Severity, Facility and Delete (click to delete the desired
server address).
4.10.5

DDM

The DDM page allows you to setup the diagnostic alarm status.
To access this page, click Diagnostics > DDM.
The following table describes the items in the previous figure.
Item
Diagnostic Alarm
Apply
The ensuing table for Diagnostic Alarm Information settings are informational only:
Diagnostic Alarm.
EKI-7428 Series User Manual
Description
Enter the IP address of the log server.
Enter the Udp port number of the log server.
Click the drop-down menu to select the severity level for local log
messages. The default is emerg.
The level options are:

emerg: Indicates system is unusable. It is the highest level of
severity

alert: Indicates action must be taken immediately

crit: Indicates critical conditions

error: Indicates error conditions

warning: Indicates warning conditions

notice: Indicates normal but significant conditions

info: Indicates informational messages

debug: Indicates debug-level messages
Click the drop-down menu to select facility to which the message
refers.
Click Apply to save the values and update the screen.
Figure 4.130 Diagnostics > DDM
Description
Click the drop-down menu to designate the announcement method:
Disabled, SysLog, E-mail, or SNMP.
Click Apply to save the values and update the screen.
118