Ddm; Figure 4.133 Diagnostics > Ddm; Figure 4.134 Diagnostics > Ddm - Advantech EKI-7708 Series User Manual

4.10.5

DDM

The DDM page allows you to setup the diagnostic alarm status.
To access this page, click Diagnostics > DDM.
The following table describes the items in the previous figure.
Item
Diagnostic Alarm
Apply
The ensuing table for Diagnostic Alarm Information settings are informational only:
Diagnostic Alarm.
The following table describes the items in the previous figure.
Item
High Alarm
High Warning
Low Alarm
Low Warning
Apply
The ensuing table for Vendor Info settings are informational only: Refresh (click to
reload the vendor information), Port, Connector, Speed, VendorName, VendorOui,
VendorPn, VendorRev, VendorSn and DateCode.
Figure 4.133 Diagnostics > DDM
Description
Click the drop-down menu to designate the announcement method:
Disabled, SysLog, E-mail, or SNMP.
Click Apply to save the values and update the screen.
Figure 4.134 Diagnostics > DDM
Description
Click Enabled or Disabled to set the alarm state.
Click Enabled or Disabled to set the alarm state.
Click Enabled or Disabled to set the alarm state.
Click Enabled or Disabled to set the alarm state.
Click Apply to save the values and update the screen.
126 EKI-7708 Series User Manual