Snmp; Figure 4.106 Management > Snmp > Snmp Settings; Figure 4.107 Management > Snmp > Snmp Community - Advantech EKI-7708 Series User Manual

4.9.2

SNMP

Simple Network Management Protocol (SNMP) is a protocol to facilitate the
monitoring and exchange of management information between network devices.
Through SNMP, the health of the network or status of a particular device can be
determined.
4.9.2.1 SNMP Settings
The SNMP Settings page allows you to set the SNMP daemon state (enabled or
disabled).
To access this page, click Management > SNMP > SNMP Settings.
The following table describes the items in the previous figure.
Item
State
Apply
The ensuing table for SNMP Information settings are informational only: SNMP.
4.9.2.2 SNMP Community
The SNMP Community page provides configuration options for the community.
SNMP v1 and SNMP v2c use the group name (Community Name) certification. It's
role is similar to the password function. If SNMP v1 and SNMP v2c are used, you can
go directly from the configuration settings to this page to configure the SNMP
community.
To access this page, click Management > SNMP > SNMP Community.
Figure 4.107 Management > SNMP > SNMP Community
The following table describes the items in the previous figure.
Item
Community Name
Access Right
Apply
The ensuing table for Community Status settings are informational only: No.,
Community Name, Access Right and Delete (click to delete the desired community
name).
Figure 4.106 Management > SNMP > SNMP Settings
Description
Click Enabled or Disabled to define the SNMP daemon.
Click Apply to save the values and update the screen.
Description
Enter a community name (up to 20 characters).
Click the radio box to specify the access level (read only or read write)
Click Apply to save the values and update the screen.
106 EKI-7708 Series User Manual