Snmp; Figure 4.179 Management > Lldp > Lldp Overloading; Figure 4.180 Management > Snmp > Snmp Settings - Advantech EKI-7720 Series User Manual

The following figure displays the LLDP Overloading settings.
Figure 4.179 Management > LLDP > LLDP Overloading
4.9.2

SNMP

Simple Network Management Protocol (SNMP) is a protocol to facilitate the monitor-
ing and exchange of management information between network devices. Through
SNMP, the health of the network or status of a particular device can be determined.
4.9.2.1 SNMP Settings
The SNMP Settings page allows you to set the SNMP daemon state (enabled or dis-
abled).
To access this page, click Management > SNMP > SNMP Settings.
The following table describes the items in the previous figure.
Item
State
Apply
The ensuing table for SNMP Information settings are informational only: SNMP.
4.9.2.2 SNMP Community
The SNMP Community page provides configuration options for the community.
SNMP v1 and SNMP v2c use the group name (Community Name) certification. It's
role is similar to the password function. If SNMP v1 and SNMP v2c are used, you can
go directly from the configuration settings to this page to configure the SNMP com-
munity.
EKI-7720 Series User Manual
Figure 4.180 Management > SNMP > SNMP Settings
Description
Click Enabled or Disabled to define the SNMP daemon.
Click Apply to save the values and update the screen.
115