Snmp; Figure 4.107 Management > Lldp > Lldp Overloading; Figure 4.108 Management > Snmp > Snmp Settings - Advantech EKI-7706 Series User Manual

4.9.1.5 LLDP Overloading
To access this page, click Management > LLDP > LLDP Overloading.
Figure 4.107 Management > LLDP > LLDP Overloading
The ensuing table for LLDP Overloading lists the following settings (informational
only):
Port, Total (Bytes), Left to Send (Bytes), Status and Status (Mandatory TLVs,
802.3 TLVs, Optional TLVs and 802.1 TLVs)
4.9.2

SNMP

Simple Network Management Protocol (SNMP) is a protocol to facilitate the
monitoring and exchange of management information between network devices.
Through SNMP, the health of the network or status of a particular device can be
determined.
4.9.2.1 SNMP Settings
The SNMP Settings page allows you to set the SNMP daemon state (enabled or
disabled).
To access this page, click Management > SNMP > SNMP Settings.
The following table describes the items in the previous figure.
Item
State
Apply
Figure 4.108 Management > SNMP > SNMP Settings
Description
Click Enabled or Disabled to define the SNMP daemon.
Click Apply to save the values and update the screen.
106 EKI-7706 Series User Manual