Figure 4.96 Qos > Rate Limit > Egress Queue - Advantech EKI-7708 Series User Manual

Item
State
Rate (Kbps)
Apply
The ensuing table for Egress Bandwidth Control Status settings are informational
only: Port and Egress Rate Limit (Kbps).
4.8.3.3 Egress Queue
The Egress Queue page allows you to set the egress bandwidth parameters.
To access this page, click QoS > Rate Limit > Egress Queue.
The following table describes the items in the previous figure.
Item
Port
Queue
State
CIR (Kbps)
Apply
The ensuing table for FE1 Egress Per Queue Status settings are informational only:
Queue Id and Egress Rate Limit (Kbps).
Description
Select Disabled or Enabled to set the Egress Bandwidth Control
state.
Enter the value in Kbps (16 to 1000000) to set the Egress Bandwidth
rate.
Click Apply to save the values and update the screen.
Figure 4.96 QoS > Rate Limit > Egress Queue
Description
Click the drop-down menu to select the port to define the Egress
queue.
Click the drop-down menu to set the queue order for the Egress
setting.
Click Disabled or Enabled to set the Egress queue state.
Enter the value in Kbps (16 to 1000000) to set the CIR rate for the
Egress queue.
Click Apply to save the values and update the screen.
100 EKI-7708 Series User Manual