Management; Lldp; Figure 4.79 Qos > Rate Limit > Egress Queue - Advantech EKI-7710E-2C User Manual

To access this page, click QoS > Rate Limit > Egress Queue.
The following table describes the items in the previous figure.
Item
Port
Queue
State
CIR (Kbps)
Apply
The ensuing table for FE1 Egress Per Queue Status settings are informational only:
Queue Id and Egress Rate Limit (Kbps).
4.9

Management

4.9.1

LLDP

LLDP is a one-way protocol without request/response sequences. Information is
advertised by stations implementing the transmit function, and is received and pro-
cessed by stations implementing the receive function.
4.9.1.1 LLDP System Settings
The LLDP System Settings allows you to configure the status (enabled or disabled)
for the protocol, set the interval for frame transmission, set the hold time multiplier
and the re-initialization delay.
EKI-7710 Series User Manual
Figure 4.79 QoS > Rate Limit > Egress Queue
Description
Click the drop-down menu to select the port to define the Egress
queue.
Click the drop-down menu to set the queue order for the Egress set-
ting.
Click Disabled or Enabled to set the Egress queue state.
Enter the value in Kbps (16 to 1000000) to set the CIR rate for the
Egress queue.
Click Apply to save the values and update the screen.
89