Figure 4.97 Qos > Rate Limit > Egress Bandwidth Control; Figure 4.98 Qos > Rate Limit > Egress Queue - Advantech EKI-7706 Series User Manual

4.8.3.2 Egress Bandwidth Control
The Egress Bandwidth Control page allows you to set the egress bandwidth control
for a listed port.
To access this page, click QoS > Rate Limit > Egress Bandwidth Control.
Figure 4.97 QoS > Rate Limit > Egress Bandwidth Control
The following table describes the items in the previous figure.
Item
Port
State
Rate (Kbps)
Apply
The ensuing table for Egress Bandwidth Control Status lists the following settings
(informational only):
Port and Egress Rate Limit (Kbps)
4.8.3.3 Egress Queue
The Egress Queue page allows you to set the egress bandwidth parameters.
To access this page, click QoS > Rate Limit > Egress Queue.
The following table describes the items in the previous figure.
Item
Port
Queue
Description
Enter the port number to set the Egress Bandwidth Control.
Select Disabled or Enabled to set the Egress Bandwidth Control
state.
Enter the value in Kbps (16 to 1000000) to set the Egress Bandwidth
rate.
Click Apply to save the values and update the screen.
Figure 4.98 QoS > Rate Limit > Egress Queue
Description
Click the drop-down menu to select the port to define the Egress
queue.
Click the drop-down menu to set the queue order for the Egress
setting.
100 EKI-7706 Series User Manual