Using The Quick Dial Keys - Ricoh C9020L Operating Instructions Manual

Using the Quick Dial Keys

You can specify a destination simply by pressing the Quick Dial key to which the destination's number is
registered.
When a Quick Dial key is pressed, the destination it is registered to appears on the screen.
• In the destination list, program an individual fax number. For details about programming destinations,
see "Registering Addresses and Users for Facsimile Functions", Network and System Settings Guide.
Specifying a destination using the Quick Dial key
You can specify a destination simply by selecting the Quick Dial keys when sending a fax.
1. Press the Quick Dial key in which the destination's number is programmed.
Flip the Quick Dial Flip Plate down to access Quick Dial keys 01 through 16, flip up to access keys
17 through 32.
The destination's name is shown on the display.
If you make a mistake, press the [Clear/Stop] key and try again.
To select more destinations, repeat this step.
2. Press the [Start] key.
• To check the contents of Quick Dial keys, print the destination list using Destination List under System
Settings. For details about the printing method, see "System Settings", Network and System Settings
Guide.
BKQ033S
Specifying a Destination
43
1