Label Insertion
With this function you can have the receiver's name printed on the document that is received at the other
end.
• To use this function, set Label Insertion to [On] when registering fax destinations in the Address Book,
and also select [Programmed Name] when sending fax documents.
• When there is an image around the area where the Label is to be printed, that image is deleted.
The receiver's name is printed as follows:
• Receiver's name: printed at the top of the page and preceded by "To:".
Set this function as follows:
• Set Label Insertion to [On] when programming fax destinations.
• Select [Programmed Name] for Label Insertion when sending fax documents.
1.
Place the original, and then select the scan settings you require.
2.
Press [TX Mode].
3.
Select [Label Insertion] using [ ] or [ ], and then press the [OK] key.
4.
Select [Programmed Name] or [Off] using [ ] or [ ], and then press the [OK] key.
The screen returns to that of step 3.
5.
Press the [Escape] key.
The standby screen returns.
To check the settings, press [TX Mode].
Label Insertion
2
85