Configuring The Network Interface Board - Ricoh C9020L Operating Instructions Manual

Item
Result
Time
User ID (when designating Job ID on telnet)
JobName (when designating Job ID on telnet)

Configuring the Network Interface Board

Use the following command to display network interface board settings:
• telnet : Use the "show" command.
Item
Common
Mode
Protocol Up/Down
AppleTalk
IPv4
Understanding the Displayed Information
Description
Print Request Result
Communication Result
• OK
Print was completed normally. However, the
print result may not be as required due to
printer problems.
• NG
Printing was not completed normally.
• Canceled
An "rcp", "rsh", or "lpr" command print
request was canceled, possibly due to the
printing application. Not applicable to the
"ftp" or "rprinter" command.
Time the print requested was received.
Time of print request reception
Printer driver-configured User ID.
Appears when the print request ID is specified.
Name of the document for printing
Appears when the print request ID is specified.
Description
Protocol Settings
4
155