Ricoh C9020L Operating Instructions Manual page 929

7. Click [OK].
8. Click [Configuration], and then click [Interface Settings] in the "Interface" area.
9. Select [Active] in "Ethernet Security".
10. Click [OK].
11. Click [Logout].
12. Quit the Web Image Monitor.
• If there is a problem with settings, you might not be able to communicate with the printer. To identify
the problem, print a network summary.
• If you cannot identify the problem, reset the printer interface to normal, and then repeat the procedure
from the beginning.
Configuring IEEE 802.1X
259
7