When You Cannot Print - Ricoh C9020L Operating Instructions Manual

When You Cannot Print

This section describes what to do if printing does not start even after performing Print.
Problem
Printing does not start.
Printing does not start.
Printing does not start.
Printing does not start.
Printing does not start.
Printing does not start.
Printing does not start.
Printing does not start.
Cause
The power is off.
The machine is set to
"Offline".
The cause is displayed on the
display of the control panel.
The interface cable is not
connected correctly.
The correct interface cable is
not being used.
The interface cable was
connected after the machine
was switched on.
The login user name, login
password, or driver
encryption key is invalid.
Advanced encryption has
been set using the Extended
Security function.
When You Cannot Print
Solution
Check the cable is securely plugged into
the power outlet and the machine. Turn
on the main power switch.
Press the [Online] key.
Check the error message or warning
status on the display panel and take the
required action.
Connect the interface cable securely. If
it has a fastener, fasten that securely as
well. See "Connecting to the Interfaces",
Network and System Settings Guide
.
The type of interface cable you should
use depends on the computer. Be sure to
use the correct one. If the cable is
damaged or worn, replace it. See
"Connecting to the Interfaces", Network
and System Settings Guide
Connect the interface cable before
turning on the machine.
Check the login user name, login
password, or driver encryption key.
Check the settings of the Extended
Security function with the administrator.
4
.
61