Ricoh C9020L Operating Instructions Manual page 398

1. Transmission
10. Press [Search].
1
When the search is finished, the results appear.
11. Select a destination using [ ] or [ ], and then press [ ] to specify it (put a tick against it).
Multiple destinations can be selected.
Press the [Check Destination] key to display details about the selected destination.
Press [ ] to deselect a destination.
12. Press the [OK] key.
• Although one user can program multiple e-mail addresses, only one address can be retrieved by the
search. The address retrieved by the search depends on the searching method supported by the LDAP
server. However, the address programmed first is normally retrieved.
• You can add one additional search condition for LDAP servers by specifying the Search Options
under Prog/Chnge/Del LDAP Server under System Settings. See "System Settings", Network and
System Settings Guide.
• The string you enter in the [Name] condition field in step 6 is read as the first or last name, depending
on the administrator's setting. For example, to search for the name "John Smith", ask the system
administrator whether you should enter "John" or "Smith".
• For details about text entry, see "Entering Text", About This Machine.
68