Message List; System Log Information - Ricoh C9020L Operating Instructions Manual

4. Monitoring and Configuring the Printer

Message List

This is a list of messages that appear in the machine's system log. The system log can be viewed using the
"syslog" command.

System Log Information

Use the following command to display the system log information:
• telnet: Use the "syslog" command.
4
Access to NetWare server <file server name>
denied. Either there is no account for this print server
on the NetWare server on password was incorrect.
account is unavailable:
same account name be used.
account is unavailable:
The authentication password is not set up.
account is unavailable:
encryption is impossible.
add_sess_IPv4: bad trap addr: <IPv4 address>,
community: <community name>
add_sess_IPv6: bad trap addr: <IPv6 address>,
community: <community name>
add_sess_IPv4: community <community name>
already defined.
add_sess_IPv6: community <community name>
already defined.
164
Message Problem and solutions
Login to the file server failed when the print server
is active. Make sure that the print server is registered
on <file server name>. If a password is specified for
the print server, delete the password.
User account is disabled. This could be because it
use the same account name as the administrator
account.
User account is disabled. This could be because the
authentication password is not set, and only the
encryption account is set.
Encryption is not possible and account is disabled.
This could be because:
• Security option is not installed.
• Encryption password has not been specified.
The IPv4 address (0.0.0.0.) is unavailable when the
community access type is TRAP. Specify the host
IPv4 address for the TRAP destination.
The IPv6 address [::] is unavailable when the
community access type is TRAP. Specify the host
IPv6 address for the TRAP destination.
The same community name already exists. Use
another community name.
The same community name already exists. Use
another community name.