Ricoh C9020L Operating Instructions Manual page 459

3. Select [Print Memory Lock File] using [ ] or [ ], and then press the [OK] key.
If no documents were received while Memory Lock was switched on, the message "There are no
memory lock files." is shown, and then the display returns to that of step 3.
4. Enter a 4-digit Memory Lock ID with the number keys, and then press the [Start] key.
If the Memory Lock ID does not match, the "Specified code does not match the programmed Memory
Lock ID." message appears, and then the display returns to the previous screen. Retry after checking
the Memory Lock ID.
5. Press the [Escape] key.
The standby display appears.
• Even when Memory Lock is available, if free memory is insufficient, reception is not possible.
• You can also apply a Memory Lock to documents that come only from certain senders.
• Documents received by SEP Code Reception are automatically printed even if this function is switched
on.
• If you print a Memory Lock File, it is deleted.
• p.154 "Administrator Tools"
Printing a File Received with Memory Lock
4
129