When placing an original into the ADF
This section explains how to place an original into the ADF.
• Maximum scan area
The following shows the maximum scan area:
Memory Transmission: 297 × 1200 mm, 11 × 47 inches (W × L)
Immediate Transmission: 297 × 1200 mm, 11 × 47 inches (W × L)
• During Immediate Transmission, the length of the scanning range can decrease to less than 1200 mm
(47 inches), depending on the resolution of the image and the configuration of the receiving machine.
If the Machine Cannot Detect the Size of Your Original
If the machine cannot detect the original size, the "Cannot detect original size. Place original again, then
press Start key." message appears.
BBB026S
BBB001S
Placing Originals
1
29