Ricoh C9020L Operating Instructions Manual page 372

1. Transmission
1. Press the [On Hook Dial] key.
1
2. Enter the fax number using the number keys.
3. Press [Tone].
4. Enter the number you want to tone dial using the number keys.
5. Press the [Start] key.
Transmission starts.
If you want to cancel a transmission, press the [Clear/Stop] key, and then remove the originals.
After transmission, the standby display appears.
• Certain services may be unavailable even when using the Tone function.
• A tone is shown as a "T" on the display and the next numbers are dialed using tonal signals.
42
BKQ032S