Ricoh C9020L Operating Instructions Manual page 183

Message
"Some page(s) are near
blank."
"Updating destination list.
Reselect destination (s) or
sender's name later."
"You do not have the
privileges to use this
function."
• If the paper tray runs out of paper, "Out of paper. Load paper." appears on the display, asking you
to add paper. If there is paper left in the other trays, you can receive documents as usual, even if the
message appears on the display. You can turn this function on or off with "Parameter Settings". For
details about how to do this, see "Parameter Settings", Facsimile Reference
Cause
The first page of the document
is almost blank.
The destination list is being
updated from the network
using SmartDeviceMonitor for
Admin or Web Image
Monitor.
The logged in user name does
not have permission for the
selected function.
Messages Displayed When Using the Facsimile Function
Solution
The original's blank side might have
been scanned. Be sure to place your
originals correctly. For details about
determining the cause of blank pages,
see "Detecting Blank Sheet", Facsimile
Reference .
Wait until the message disappears. Do
not switch off the power while this
message is displayed. Depending on the
number of destinations to be updated,
there may be some delay before you
can resume operation. Operation is not
possible while this message is displayed.
Contact the administrator about the
permission for the required function.
.
3
41