Ricoh C9020L Operating Instructions Manual page 163

5. Select [Start] using [ ] or [ ], and then press the [OK] key.
6. Press [Print] and a test pattern is printed.
When performing auto color calibration from the printer function, select test patterns from[ TestP.1
(600 600 dpi)] or [TestP.2 (1800 600 dpi)] and then press [Print].
7. Place the test pattern on the exposure glass and press [Scan].
8. Press [Exit].
The image will be corrected.
• The test pattern will not be read if it is set in the ADF.
• The test pattern will be printed on an A4, 8
(Japanese Industrial Standard) will be used. Make sure to check the paper set in the paper tray.
• Set the test pattern in the following way:
When the Printed Color Differs From the Original Color
1
/ 11 size page. If A4 is not available, A3 or B4 JIS
2
1
21