Ricoh C9020L Operating Instructions Manual page 350

1. Transmission
• To specify a destination using a Quick Dial key, see "Using the Quick Dial Keys".
• If the combined total number of programmed destinations exceeds the maximum value, only
1
Immediate Transmission is possible.
• For the maximum values of the following items, see "Maximum Values".
• Number of documents you can store in memory for Memory Transmission
• Number of pages you can store in memory (using A4 Standard <ITU-T 1 Chart>)
• Number of destinations you can specify per file
• Number of destinations you can specify for all files (including files in memory)
• p.35 "Scan Settings"
• p.43 "Using the Quick Dial Keys"
• p.193 "Maximum Values"
Sending originals using the exposure glass (Memory Transmission)
This section explains how to send originals by Memory Transmission using the exposure glass.
1. Make sure that Memory Trans. indicator lights.
2. Place the first page of the original face down on the exposure glass.
3. Specify a destination.
4. Make the scan settings you require.
5. Press the [Start] key.
The machine starts scanning.
6. Place the next original on the exposure glass within 60 seconds when you send multiple
originals, and then repeat steps 4 and 5.
Repeat this step for each page.
20