Ricoh C9020L Operating Instructions Manual page 268

2. Copying
2
1. Paper guides
2. Extender
4. Press the [ ] key.
5. Select the size and type of the paper.
6. Press [OK] key.
7. Place the originals, and then press the [Start] key.
8. When the copy job is finished, press the [Clear Modes] key to clear the settings.
9. Close the bypass tray.
• Certain types of paper might not be detected properly when placed on the bypass tray. If this happens,
remove the paper and place it on the bypass tray again.
• Load only as much paper as can be held between the guides on the bypass tray. Overloading the
bypass tray can result in misfeeds and skewed images.
• To support A4 , 8
• To prevent multiple sheets from being fed at once, fan paper before placing it on the tray.
• When the Sort function is selected, press the [ ] key after all originals have been scanned.
• When the Panel Key Sound is turned off, it will not sound if you insert paper into the bypass tray. For
details about Panel Key Sound, see "System Settings", Network and System Settings Guide.
• Depending on the environment where the machine is being used, you might at times hear a rustling
noise from paper moving through the machine. This noise does not indicate a malfunction.
• The following paper sizes can be selected as the standard sizes:
• A3 , A4
1
, 8 / × 11
2
1 1
• 7 / × 10 /
4
, 8K , 16K
30
1
/ × 11 or larger paper sizes, pull out the extender.
2
, A5 , A6 , B4 JIS , B5 JIS
1 1
, 8 / × 14 , 8 /
4 4
1 1 1
, 5 / × 8 / , 4
2 2 2
,12 × 18 , 11 × 15 , 10 × 14
1
2
BLB002S
, B6 JIS , 11 × 17 , 8
× 13 , 8 × 13 , 8 × 10 ,
1 7 1
/ × 9 / , 3 / × 7 /
8 2 8
1
/ × 14 , 8
2
, C6 Env , C5 Env
2
1
/ × 13
2
, DL Env