Ricoh C9020L Operating Instructions Manual page 175

Problem
Copy paper becomes
creased.
You cannot combine several
functions.
Images are skewed.
Images are skewed.
Edges of sheets are creased. The paper is damp.
Sheets are feeding in
together, resulting in jams.
Combine
Problem
When using "Combine",
parts of the image are not
copied.
Cause
The paper is too thin.
Selected functions cannot be
used together.
The side fences in the paper
feed tray are not set properly.
The paper is feeding in at a
slant.
Sheets are sticking together.
Cause
You specified a reproduction
ratio that does not match the
sizes of your originals and
copy paper.
When You Cannot Make Copies As Wanted
Solution
Use recommended paper. See
"Recommended Paper Sizes and
Types", About This Machine
Check the combination of functions and
make the settings again. See "Function
Compatibility", Copy Reference
Make sure the side fences are set
properly. For details about how to set the
side fences, see "Changing the Paper
Size", About This Machine
Load the paper correctly. See "Loading
Paper", About This Machine
Use paper that has been stored in the
recommended temperature and
humidity condition. See "Paper
Storage", About This Machine
Fan the pages to loosen the paper
before loading it. Alternatively, feed the
paper one sheet at a time.
Solution
When you specify a reproduction ratio
using Manual Paper Select mode, make
sure the ratio matches your originals and
the copy paper. Select the correct
reproduction ratio before using
Combine mode. See "One-Sided
Combine", "Two-Sided Combine", or
"Auto Reduce/Enlarge", Copy
Reference .
.
2
.
.
.
.
33