2.
Place the original face down on the exposure glass. The original should be aligned to the
rear left corner.
Start with the first page to be copied.
1. Positioning mark
2. Scales
3.
Lower the ADF.
• When you lower the ADF, an indicator will light to show you that the machine is detecting the size of
the original.
Placing Originals in the ADF
Place originals in the ADF.
Be sure not to block the sensor or load the original untidily. Doing so may cause the machine to detect the
size of the original incorrectly or display a paper misfeed message. Also, be sure not to place originals or
other objects on the top cover. Doing so may cause a malfunction.
1. Sensors
Settings should be made in the following situations:
BCU011S
BLF003S
Placing Originals
1
21