Ricoh C9020L Operating Instructions Manual page 707

When it is set to [Level 2], the machine recovers from energy saver mode to normal mode and become
ready to make copy in about 10 seconds. When it is set to [Level 2], the machine consumes less power
than when it is set to [Level 1].
The default setting is [Level 2].
Firmware Version
You can check the version of the software installed in this machine.
Network Security Level
For details about this function, consult your administrator.
Transfer Log Setting
For details about this function, consult your administrator.
Data Security for Copying
For details about this function, consult your administrator.
Fixed USB Port
You can specify whether or not to fix the USB port.
The default setting is [Off].
If a PC with the printer driver installed is connected to another device of the same model through the
USB interface, selecting [On] for this option eliminates the additional installation of the driver to the
PC.
• p.16 "Accessing User Tools"
• p.38 "Programming the LDAP server"
• p.47 "Programming the Realm"
• p.175 "Address Book"
Administrator Tools
1
37