User Tools Menu - Ricoh C9020L Operating Instructions Manual

User Tools Menu

This section describes the User Tools in Copier Features.
Default settings are shown in bold type.
APS/Auto R/E Priority
You can select "Auto Paper Select Priority" (APS Priority) or "Auto R/E Priority" (Auto Reduce/Enlarge
Priority) or "Off".
The default setting is Auto Paper Select Priority.
Auto Tray Switching
If you load paper of the same size in two or more trays, the machine automatically shifts to the other
when the first tray runs out of paper (when "On" is selected). This function is called "Auto Tray
Switching". This setting specifies whether to use Auto Tray Switching or not.
The default setting is On.
• With Image Rotation
Use to copy when using the Auto Tray Switching function.
• Off
When a paper tray runs out of paper, copying is interrupted and the message "Load paper." is
displayed.
Original Type Setting
You can adjust copy finish quality level according to original type. You can choose these functions
after selecting original type(Text/Photo) and color mode (Full Color/B&W).
The default setting for "Full Color 1(Text)" is Text,Auto Image Dens.=Off.
The default setting for "Full Color 2(Photo)" is Photo,Copied Photo.
The default setting for "Full Color 3(Text/Photo)" is T/P,PrintPhot,ImageDens=Off.
The default setting for "Black&White 1(Text)" is Text,Auto Image Dens.=On.
The default setting for "Black&White 2(Photo)" is Photo,Copied Photo.
The default setting for "Black&White 3(Text/Photo)" is T/P,PrintPhot,ImageDens=On.
Duplex Mode Priority
You can select the type of Duplex function effective when the machine is turned on, reset, or modes
are cleared.
The default setting is 1 Sided
Orientation
You can select the original orientation when using the Combine/Series or Duplex function.
The default setting is Do not Specify.
1 Sided.
User Tools Menu
4
81