Specifying Original Sizes - Ricoh C9020L Operating Instructions Manual

1. Placing Originals
When placing custom size originals:
See "Custom sizes".
1. Adjust the document guides to the original size.
1
2. Set the aligned originals face up into the ADF.
Do not stack originals beyond the limit mark.
The first page should be on the top.
1. Limit mark
2. Document guide
• Straighten curls in the originals before placing them on the ADF.
• To prevent multiple sheets from being fed at once, fan the original before placing it on the ADF.
• Set the original squarely.
• p.23 "Custom sizes"

Specifying Original Sizes

Specify the size of the originals.
Regular sizes
When placing a regular size original on the exposure glass or in the ADF, specify the size of the originals
from the regular sizes shown on the display.
22
BCU003S