Ricoh C9020L Operating Instructions Manual page 818

4. Monitoring and Configuring the Printer
Mismatch: Paper Type
Near Replacing: Color Dev. Unit
Near Replacing: Color PCU
Near Replacing: Develop. Unit C
Near Replacing: Develop. Unit K
Near Replacing: Develop. Unit M
4
Near Replacing: Develop. Unit Y
Near Replacing: Fusing Unit
Nearly Full: Waste Toner
Nearly Full: Waste Toner Bottle2
Need more Staples
No Paper: Interposer Tray
No Paper: Selected Tray
No Paper: Tray 1
No Paper: Tray 2
No Paper: Tray 3
No Paper: Tray 4
Not Detected: B2 Lever
Not Detected: Black Toner
Not Detected: Cyan Toner
Not Detected: Develop. Unit (C)
Not Detected: Develop. Unit (K)
Not Detected: Develop. Unit (M)
Not Detected: Develop. Unit (Y)
148
Messages Description
Indicated paper tray does not contain paper of
selected type.
Prepare the new color development unit.
Prepare the new color photoconductor unit.
Prepare the new development unit (cyan).
Prepare the new development unit (black).
Prepare the new development unit (magenta).
Prepare the new development unit (yellow).
Prepare the new Fusing Unit.
Waste toner bottle is nearly full.
Waste toner bottle2 is nearly full.
Stapler has almost run out of staples.
There is no paper in interposer unit.
There is no paper in specified tray.
There is no paper in tray 1.
There is no paper in tray 2.
There is no paper in tray 3.
There is no paper in tray 4.
B2 lever is not correctly set.
Black toner is not correctly set.
Cyan toner is not correctly set.
The development unit (cyan) is not correctly set.
The development unit (black) is not correctly set.
The development unit (magenta) is not correctly set.
The development unit (yellow) is not correctly set.