Changing A Fax Destination - Ricoh C9020L Operating Instructions Manual

1. Transmission
9. Select [Fax Settings] using [ ] or [ ], and then press the [OK] key.
1
10. Enter the fax number using the number keys.
11. Press [Option], and then specify the following functions for each destination, as necessary:
• SUB Code: register a SUB Code to use SUB Code Transmission.
• SEP Code: register a SEP Code to use SEP Code Reception.
• Label Insertion: if you enable this function, when the faxes you send are printed at the receiver's
end, the receiver's name is also printed.
After changing the settings, press [Exit], and then press the [OK] key.
12. Press [End].
13. Press the [OK] key.
14. Press the [User Tools/Counter] key.
• For details about the procedure in step 11, see "Registering Addresses and Users for Facsimile
Functions", Network and System Settings Guide.

Changing a Fax Destination

This section explains how to change a name and fax number registered in the Address Book.
52