1. Placing Originals
Placing Originals
This section describes the procedure for placing originals on the exposure glass and in the ADF.
1
Take care to place originals after any correction fluid and ink has completely dried. Not taking this
precaution could cause marks on the exposure glass that will be copied onto paper.
• For original sizes you can place on the exposure glass and in the ADF, see "Originals".
• p.15 "Originals"
Original Orientation
You can specify the original orientation if necessary.
When using the exposure glass, place the original face down. When using the ADF, place it face up.
1. ADF
2. Exposure glass
Placing Originals on the Exposure Glass
Place originals on the exposure glass.
• Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged.
1.
Lift the ADF.
Be sure to lift the ADF by more than 30 degrees. Otherwise, the size of the original might not be
detected correctly.
20
BAT020S