Netware Printing - Ricoh C9020L Operating Instructions Manual

7. Appendix
When using network utility
If the machine is connected to a network, observe the following points when setting up the machine or
changing settings:
For more details, see the operating instructions and Help for the ScanRouter delivery software and
DeskTopBinder.
When a dial-up router is connected in a network environment
The settings for the delivery server to be connected must be made appropriately for the machine with
the ScanRouter delivery software, Auto Document Link, or DeskTopBinder. In addition, set up
connected devices using the I/O settings of the ScanRouter delivery software administration utility.
If the network environment changes, make the necessary changes for the delivery server using the
machine, the administration utility of client computers, Auto Document Link, and DeskTopBinder. Also,
set the correct information for the connected devices using the I/O settings of the ScanRouter delivery
software administration utility.
• If the machine is set up to connect to the delivery server via a dial-up router, the router will dial and
go online whenever a connection to the delivery server is made. Telephone charges may be incurred.
When connected to a computer that uses dial-up access
7 • Do not install the ScanRouter delivery software on a computer which uses dial-up access.
• When using the ScanRouter delivery software, DeskTopBinder, Auto Document Link, or a TWAIN
driver on a computer with dial-up access, a dial-up connection may be performed when
connecting to the delivery server and other equipment, depending on the setup. If the computer
is set up to connect to the Internet automatically, the confirmation dialog box will not appear,
and telephone charges may be incurred without your being aware of it. To prevent unnecessary
connections, the computer should be set up so the confirmation dialog box always appears
before establishing a connection. Do not make unnecessary connections when using the above
listed software.

NetWare Printing

• IPv6 cannot be used on this function.
Form feed
You should not configure form feed on NetWare. Form feed is controlled by the printer driver on Windows.
If NetWare form feed is configured, the printer might not work properly. If you want to change form feed
settings, always configure them using Windows.
254