Ricoh C9020L Operating Instructions Manual page 354

1. Transmission
1. Make sure that Memory Trans. indicator is not lit.
1
If it is lit, Memory Transmission mode is selected. Press the [Memory Trans.] key.
2. Place the original into the ADF.
3. Select the scan settings you require.
For details about the scan settings, see "Scan Settings".
4. Using the number keys or a Quick Dial key, specify a destination.
If you make a mistake, press the [Clear/Stop] key, and then enter the correct number.
5. Press the [Start] key.
The machine dials a destination.
• To specify a destination using a Quick Dial key, see "Using the Quick Dial Keys".
• Documents are not stored in memory.
• p.35 "Scan Settings"
• p.43 "Using the Quick Dial Keys"
Sending originals using the exposure glass (Immediate Transmission)
This section explains how to send originals by Immediate Transmission using the exposure glass.
1. Make sure that Memory Trans. indicator is not lit.
2. Place the first page face down on the exposure glass.
24
BKQ027S